Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump

Using 2 NE-1000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

Features:

· Fully programmable; automation capable

· Operates stand-alone or from a computer

· Infusion and withdrawal

· Set a single pumping rate and/or dispensing volume

· Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer

· Network, control, and monitor up to 100 pumps with one computer

· Worldwide power supplies available

· Motor stall detection

· Dispensing accuracy of +/-1%

· Unlimited lifetime technical support

Two year warranty

Example Flow Rates (NE-1000):

Syringe Size (cc)

Maximum Rate (mL/hr)

Minimum Rate (µL/hr)

0.5 µL

25.49

0.001

1

53.09

0.73

3

192.5

2.646

5

406.1

5.581

10

600

8.244

20

975.8

13.41

30

1282

17.63

60

2120

29.13

Sample syringe configurations, can hold any size syringes below 60 cc.

Maximum syringe size:

Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwise

High pressure notes:

The NE-1000 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi.